nozzle pressure

the vectoring angle increases with the decreasing of the nozzle pressure ratio.

减小喷管落压比可以提高矢量偏转角度。

As the input power of the film heat source increased, the heat transfer coefficient of spray cooling decreased and tended to decrease significantly under high mass flux and nozzle pressure.

随着薄膜热源的输入功率的升高，其喷雾冷却的换热系数随之减少。当在质量流量及喷嘴压力较高条件下，这种趋势更为明显。

with increase of nozzle pressure ratio, the infrared radiation from underside of nozzle is reduced.

随着喷管落压比的增加，喷管上方的整体红外辐射降低。

effects of nozzle pressure on disc swirl spun yarn

圆盘式旋流纺的加捻气压对成纱的影响

A measuring method which is named postposition throttle nozzle pressure style pneumatic measuring principle for servo valve's overlap measuring is introduced, and a servo valve's orifice machining quality measuring instrument is developed, which is controlled by computer.

介绍一种后置节流孔压力式气动测量原理用于伺服阀叠合量的气动测量，研制了一台伺服阀阀口加工质量测量仪，并实现了微机自动控制。

influences of insufficient piston cooling nozzle pressure on diesel engine

活塞冷却喷嘴压力不足对柴油发动机的影响

this principle is to use the ink-jet printing piezo actuator device to be fixed in ink spray nozzle pressure continuous injection.

这栽喷墨打印道理是诳骗压电驱动安设差喷脚洋墨水加以变动不张力，使其不断喷射。

because each nozzle pressure varies, so printing plate on the fall in the number of polymer materials also varied.

由于每个喷嘴的水压都有所差别，所以印版上被冲掉的矮分子撮合质料的数目也各不相同。

hydraulic pressure, nozzle pressure and cavity pressure sensing locations are shown in figure 11.

光电感应然后就是这个液压式的）液压缸压力、喷嘴压力、模腔压力的感应位置如图11所示。

The affecting factors of the performance parameters of the thrust vectoring nozzle are investigated. And the affect of nozzle pressure ratio, nozzle area ratio and geometric defected angle on the performance parameters is also investigated.

研究了影响矢量喷管性能的因素，研究了压比、面积比以及几何偏角对矢量喷管性能的影响。